+86-21-5432 2103

PV Module Aging Test Location: 首页 > Product Solutions > PV Module Aging Test > Dynamic Mechanical Load Tester (Cylinder Type)

Dynamic Mechanical Load Tester (Cylinder Type)

Product description Specifications Download

Meets the static mechanical test requirements in the 4.16(MQT16) clause of the IEC 61215-2016 standard. Also, meet the IEC TS 62872-2016 standard.

l  The cylinder drives the vacuum suction cup to pressurize and suck.

l  The pressure can be adjusted by the pressure regulator and the pressure value is displayed on the screen

l  Analog actual installation situation, providing a variety of module mounting fixtures

l  The suction cup spacing is adjustable and the universal structure ensures the uniform stress on the modules.

l  The position of the module support point can be easily adjusted to meet the standard requirements

l  Monitor the ambient temperature and humidity in the test area

l  Equipped with computer and software, the software has the function of real-time display of pressure, test time, cycle times, temperature and humidity.

l  For static tests, parameters such as pressure, suction tension, and holding time can be set.

l  Current continuity of in the module could be monitored and could alarm without current.


Item

Parameters

Surface   pressure

+900Pa+8000Pa

Surface   suction

+800Pa+6000Pa

Pressure   accuracy

5%

Sucker   quantity

60(15 pcs cylinder)

Pressure   accuracy

5%

Single   cylinder pressure

6bar

Suction   cup diameter

120mm

Cylinder   distance

100mm

Suction   cups and upper joints can be rotated

≥15°

Pressure   speed

15Pa/s

Temperature monitoring range

050

Temperature accuracy

±1

Temperature repeatability

0.5

Humidity range

0100%RH

Humidity accuracy

5%

Humidity resolution

1%RH

voltage range

100V

Current range

1A

Current accuracy

1%FS

Compressor capacity

2.6m3/min

Compressor pressure

0.8MPa

Gas vessel

1m3

Compressor Power

15KW(415VAC, 50HZ)

Presser calibrator range

300kg

Presser calibrator accuracy

±0.1kg